Add the FSA 720, to an existing laptop or our Calibre PC & Trolley, and build your own workshop test system YOUR WAY.
A motor system tester for PC or laptop for effective vehicle diagnostics, including 10 sensor connections to allow effective work without continuous sensor changing.
(A computer or a laptop is required to operate the FSA 720)
From the standard engine test…
As with its tried and tested predecessors, the new tester generation can perform the standard engine test for measuring engine-related signals, e.g. ignition signal, ignition angle or oil temperature.
… to component testing with innovative software
Major advances seen in the new generation of testing technology are the testing options for electrical and electronic components. In this area, the FSA 720 and 740 offer a large number of new and efficient applications with comprehensive software support.
Long-term measurement
The 24-hour measurement of the battery peak coil current on vehicles provides information on “battery current drain”, and uses this to identify the causes of frequent starting problems.
Extensive sensor equipment
Apart from the actual measurement module, the Bosch FSA 720 system tester also includes an extensive range of sensor simulation modes. Ten sensor slots and a free slot for future sensor technology allow effective work without continuous sensor changing.
The FSA 720 measurement module can be extended by using an existing KTS 520 or 550 and a PC to a mobile diagnostics system with control unit diagnostics and vehicle system analysis.
